This blog has evolved as I have as a maker. It starts at the beginning of my journey where I began to re-tread my tires in the useful lore of micro electronics and the open-source software that can drive them. While building solutions around micro-electronics are still an occasional topic my more recent focus has been on the 3D Printing side of making.
Sunday, February 7, 2016
Some Pictures of Bling
This post is actually just a placeholder for some pictures of various FoW Bling!
Nice stuff, but whatabout buckets, german panzerblingers needs bucketloads of them! The handle is probably best let to the modeller to make of wire though. An example: http://rs90.pbsrc.com/albums/k241/stephen_munton/tiger%20tanks/tiger1a.jpg?w=480&h=480&fit=clip
If you look closely at the picture of the well you will see that there is a bucket there...with a handle! I have also used that same bucket on the back of a tank but will note to self that it should be available as bling!
Nice stuff, but whatabout buckets, german panzerblingers needs bucketloads of them! The handle is probably best let to the modeller to make of wire though.
ReplyDeleteAn example:
http://rs90.pbsrc.com/albums/k241/stephen_munton/tiger%20tanks/tiger1a.jpg?w=480&h=480&fit=clip
If you look closely at the picture of the well you will see that there is a bucket there...with a handle! I have also used that same bucket on the back of a tank but will note to self that it should be available as bling!
DeleteGreat, I guess that there will be an blog post when there is new stuff available on the Ebay store?
ReplyDelete